LM7805 5 V Regulator

The LM7805 is the classic three-pin regulator: any input from about 7 V up gives a steady 5 V at up to 1.5 A.

LM7805 Voltage Regulator

At a glance

Pins and properties exactly as the circuit editor and simulator define this part. The text below explains how to use them.

Pinout

Pinout of the LM7805 Voltage Regulator, drawn as in the circuit editor. Select a label to see that pin in the table below.

Properties

What you can change in the Property Inspector.

Properties of this part
PropertyRange or choicesDefault
Regulated Output (Vout)4.8 to 5.2 V5 V
Dropout Voltage1 to 3 V2 V
Cooling / Thermal RatingBare TO-220 (Pmax ≈ 1.5 W), With Heatsink (Pmax ≈ 15.0 W)With Heatsink (Pmax ≈ 15.0 W)
Max Rated Current0.2 to 2.2 A1.5 A

The LM7805 is a fixed 5 V positive linear regulator in a TO-220 package. With one wire in, one out and one ground, it makes a clean 5 V supply from a battery or adapter. It is a linear regulator: the difference between input and output voltage becomes heat.

Pins

Pins of this part
PinLabelTypeNotes
ININSignal inInput voltage (about 7 V or more)
GNDGNDBidirectionalGround
OUTOUTSignal outRegulated 5 V output

Things to know

  • Dropout: the input must be about 2 V above the output (so about 7 V in at least).
  • Heat: (VIN - VOUT) x current is lost as heat. Without a heatsink the package can get rid of about 1.5 W (it warms by about 65 °C per watt); with a typical heatsink about 15 W (about 5 °C per watt). At 12 V in and 500 mA, the part burns 3.5 W: it needs a heatsink.
  • Maximum current: 1.5 A by default.

Properties

Output voltage, dropout voltage, cooling rating (no heatsink or heatsink) and maximum current are in the Properties panel. The simulator shows an overload when the part is pushed past its rating.

Typical use

A 9 V battery on IN, the 5 V rail on OUT, a small capacitor near each of IN and OUT, grounds joined.

LM7805 5 V Regulator — OMS Parts