LM7812 12 V Regulator

The LM7812 is a three-pin regulator that gives a steady 12 V at up to 1.5 A from an input of about 14 V or more.

LM7812 Voltage Regulator

At a glance

Pins and properties exactly as the circuit editor and simulator define this part. The text below explains how to use them.

Pinout

Pinout of the LM7812 Voltage Regulator, drawn as in the circuit editor. Select a label to see that pin in the table below.

Properties

What you can change in the Property Inspector.

Properties of this part
PropertyRange or choicesDefault
Regulated Output (Vout)11.5 to 12.5 V12 V
Dropout Voltage1 to 3 V2 V
Cooling / Thermal RatingBare TO-220 (Pmax ≈ 1.5 W), With Heatsink (Pmax ≈ 15.0 W)With Heatsink (Pmax ≈ 15.0 W)
Max Rated Current0.2 to 2.2 A1.5 A

The LM7812 is a fixed 12 V positive linear regulator in a TO-220 package, the bigger sibling of the LM7805. It makes a steady 12 V rail (for relays, motor drivers or LED strips) from a higher supply. It is a linear regulator: the voltage difference between input and output is lost as heat.

Pins

Pins of this part
PinLabelTypeNotes
ININSignal inInput voltage (about 14 V or more)
GNDGNDBidirectionalGround
OUTOUTSignal outRegulated 12 V output

Things to know

  • Dropout: the input must be about 2 V above the output, so 14 V or more.
  • Heat: (VIN - VOUT) x current is lost as heat. Without a heatsink the package can get rid of about 1.5 W (about 65 °C per watt); with a typical heatsink about 15 W (about 5 °C per watt). A 24 V input at 500 mA burns 6 W, so it needs a heatsink.
  • Maximum current: 1.5 A by default.

Properties

Output voltage, dropout voltage, cooling rating and maximum current are in the Properties panel. The simulator shows an overload when the part is pushed past its rating.

LM7812 12 V Regulator — OMS Parts