ESP32-S3 DevKitC-1

The ESP32-S3 DevKitC-1 is Espressif's flagship dual-core SoC, packing vector instructions for AI acceleration, native USB, and massive memory capacities.

ESP32-S3 DevKitC-1 v1.0

At a glance

Pins and properties exactly as the circuit editor and simulator define this part. The text below explains how to use them.

Board facts

Board facts
FactValue
Operating voltage3.3 V
FamilyEspressif
Python runtimemicropython
Wi-FiYes
BluetoothYes
Native USBYes

Pinout

Pinout of the ESP32-S3 DevKitC-1 v1.0. Select a label to see that pin in the table below.

The ESP32-S3 DevKitC-1 is Espressif's flagship dual-core SoC, packing vector instructions for AI acceleration, native USB, and massive memory capacities.


1. Hardware Specifications

  • Processor: Dual-core Xtensa 32-bit LX7 CPU running at 240 MHz.
  • Logic Level: 3.3V. All pins operate on 3.3V logic.
  • Memory Limits: 8 MB Flash, 512 KB SRAM, plus 2 MB PSRAM for data-heavy applications.
  • Wireless: Integrated 802.11 b/g/n Wi-Fi and Bluetooth v5.0 / BLE (extended range and mesh networking).

2. Detailed Pinout & GPIO Map

Below is the physical-to-code mapping table for the ESP32-S3 DevKitC-1 (36 GPIO pins total):

Pins of this board
PinKindFeaturesAlternate functionsNotes
3V3Power3.3V
3V3Power3.3V
RSTSpecialRESET
D4GPIOPWM, ADCGPIO4, PWM, ADC1, TOUCH4Cap-touch channel 4.
D5GPIOPWM, ADCGPIO5, PWM, ADC1, TOUCH5Cap-touch channel 5.
D6GPIOPWM, ADCGPIO6, PWM, ADC1, TOUCH6Cap-touch channel 6.
D7GPIOPWM, ADCGPIO7, PWM, ADC1, TOUCH7Cap-touch channel 7.
D15GPIOPWM, ADCGPIO15, PWM, ADC2No touch function on these 4 pins. No hardware DAC exists on this chip at all (Espressif removed it in the S3 silicon).
D16GPIOPWM, ADCGPIO16, PWM, ADC2No touch function on these 4 pins. No hardware DAC exists on this chip at all (Espressif removed it in the S3 silicon).
D17GPIOPWM, ADCGPIO17, PWM, ADC2No touch function on these 4 pins. No hardware DAC exists on this chip at all (Espressif removed it in the S3 silicon).
D18GPIOPWM, ADCGPIO18, PWM, ADC2No touch function on these 4 pins. No hardware DAC exists on this chip at all (Espressif removed it in the S3 silicon).
D8GPIOPWM, ADCGPIO8, PWM, ADC1, TOUCH8, SDA, I2CDefault I2C Serial Data pin.
D3GPIOPWM, ADCGPIO3, PWM, ADC1, TOUCH3Cap-touch channel 3.
D46GPIOPWMGPIO46, PWMGeneral Purpose Input / Output (4 pins).
D9GPIOPWM, ADCGPIO9, PWM, ADC1, TOUCH9, SCL, I2CDefault I2C Serial Clock pin.
D10GPIOPWM, ADCGPIO10, PWM, ADC1, TOUCH10Cap-touch channel 10.
D11GPIOPWM, ADCGPIO11, PWM, ADC2, TOUCH11Cap-touch channel 11.
D12GPIOPWM, ADCGPIO12, PWM, ADC2, TOUCH12Cap-touch channel 12.
D13GPIOPWM, ADCGPIO13, PWM, ADC2, TOUCH13Cap-touch channel 13.
D14GPIOPWM, ADCGPIO14, PWM, ADC2, TOUCH14Cap-touch channel 14.
5VPower
GNDGround
GNDGround
TXGPIOPWMUART0Console/programming UART — avoid other serial devices on these two pins during upload.
RXGPIOPWMUART0Console/programming UART — avoid other serial devices on these two pins during upload.
D1GPIOPWM, ADCGPIO1, PWM, ADC1, TOUCH1Cap-touch channel 1.
D2GPIOPWM, ADCGPIO2, PWM, ADC1, TOUCH2Cap-touch channel 2.
D42GPIOPWMGPIO42, PWMGeneral Purpose Input / Output (4 pins).
D41GPIOPWMGPIO41, PWMGeneral Purpose Input / Output (4 pins).
D40GPIOPWMGPIO40, PWMGeneral Purpose Input / Output (4 pins).
D39GPIOPWMGPIO39, PWMGeneral Purpose Input / Output (4 pins).
D38GPIOPWMGPIO38, PWMInternally wired to the onboard RGB status light.
D37GPIOPWMGPIO37, PWM, MISO, SPIDefault SPI Master In Slave Out pin.
D36GPIOPWMGPIO36, PWM, SCK, SPIDefault SPI Serial Clock pin.
D35GPIOPWMGPIO35, PWM, MOSI, SPIDefault SPI Master Out Slave In pin.
D0GPIOPWMGPIO0, PWMWired to the physical BOOT button. Must pull low to enter flashing mode.
D45GPIOPWMGPIO45, PWMGeneral Purpose Input / Output (4 pins).
D48GPIOPWMGPIO48, PWMGeneral Purpose Input / Output (4 pins).
D47GPIOPWMGPIO47, PWMGeneral Purpose Input / Output (4 pins).
D21GPIOPWMGPIO21, PWMGeneral Purpose Input / Output.
D20GPIOPWMGPIO20, PWMGeneral Purpose Input / Output.
D19GPIOPWMGPIO19, PWMGeneral Purpose Input / Output.
GNDGround
GNDGround
  • D34: Default SPI Chip Select pin.

[!NOTE] Real ESP32-S3 silicon routes native USB (D-/D+) through dedicated USB_D-/USB_D+ pads, not a regular labeled GPIO header pin — and OMS's own board model doesn't tag any pin with a native-USB capability at all. There is no USB HID support in OMS for this board today (Section 5).


3. AI Vector Acceleration and WS2812B LED

  • Vector Instructions: The Tensilica LX7 cores in the ESP32-S3 feature specialized hardware acceleration for vector operations. This enables real-time execution of neural network models (such as localized voice assistant wake-word detection or low-resolution image processing) directly on the chip.
  • Onboard WS2812B RGB: Pin GPIO38 is hardwired to a miniature WS2812B NeoPixel RGB LED. Program it with the generic NeoPixel actuator blocks (Section 5) — not a board-specific block set.

4. Compiler Settings & IDE Properties

When targeting this board, the compiler is intended to use the following parameters:

  • FQBN: esp32:esp32:esp32s3
  • Default Flashing Baud Rate: 921600
  • Flash Mode / File Type: esp
  • Flash Memory Offsets: { bootloader: 0x0000, partitions: 0x8000, app: 0x10000 } (the S3's bootloader offset is 0x0000, unlike the plain ESP32 DevKit V1's 0x1000).
  • Programming Runtimes: Supports both C++ (Arduino) and MicroPython.

[!WARNING] Known bug: same issue as the ESP32-S2 (Section 3.6) — this board's actual internal id (esp32s3) doesn't match any key in the compiler's board-config lookup table (which only has hyphen/underscore forms like esp32-s3), so compiling currently silently falls back to plain ESP32's FQBN (esp32:esp32:esp32) instead of the S3-specific one above. See Known_Bugs.md §2.0.


5. Supported Blockly Board Blocks

Drawing the blocks…

6. Simulator and Flashing Diagnostics

  • Simulator: Standard digital pins and loop timings are simulated. The NeoPixel RGB LED colors update visually on the board graphic. The advanced vector logic, Wi-Fi connectivity, and direct USB HID controls require hardware flashing.
  • Flashing Guide: Connect the board to your computer using either of the two USB ports. If utilizing the native USB port, the board uses its internal USB-to-serial loader. If flashing fails, press and hold the BOOT (GPIO 0) button, tap RESET (EN), then release BOOT to force ROM download mode. Confirm that your board is supplied with stable 5V power, as dual-core compilation uploads draw significant startup current.

7. Communication Buses & Electrical Capabilities

Beyond the per-pin table above, here's the board's bus-level capability summary (from its own capabilities config):

BusDetails
UART1 hardware bus (TX/RX pins), shared with the USB programming port.
I2CDefault on D8 (SDA) / D9 (SCL).
SPIDefault on MOSI D35, MISO D37, SCK D36, CS D34.
1-WireNo dedicated 1-Wire hardware peripheral. Sensors like the DHT11 bit-bang the timing on any regular digital pin instead.
Analog (ADC)18 ADC-capable pins (D1–D18), 12-bit resolution. No hardware DAC on this chip.
Touch14 capacitive touch-capable pins: D1–D14.
PWMEvery GPIO pin on this board is PWM-capable (8 LEDC channels, 14-bit resolution, up to 40 MHz).

Electrical limits: max 40 mA per pin, max 1500 mA total across all pins combined (per the ESP32-S3 datasheet's absolute maximum ratings).


8. Further Reading


ESP32-S3 DevKitC-1 — OMS Parts