A P-Channel MOSFET is the complementary counterpart to an N-Channel MOSFET — it turns on when the gate is pulled below the source by more than its threshold, making it ideal for high-side switching without a charge-pump driver. In Open Maker Studio, it does not have Blockly code blocks — it interacts directly with the real-time SPICE analog simulator.
1. Schematic Symbol
Standard enhancement-mode P-Channel MOSFET symbol (arrow direction reversed from N-Channel):
2. Real Model & Characteristics
OMS's P-Channel MOSFET is calibrated against real logic-level small-signal PMOS parts (BSS84/SI2301-class), with its own distinct KP/LAMBDA values from the N-Channel model — real N-channel and P-channel dies use different process geometries, not a simple sign-flip of the same numbers.
3. Component Properties (Property Inspector)
When you select a P-Channel MOSFET on the canvas, you can modify the following parameters in the Property Inspector panel:
- Gate Threshold — Vgs_th (
thresholdVoltage): Sets the (negative) gate-source voltage magnitude needed to turn the channel on.- Default:
2V (logic-level — IRF9Z34N) - Options:
1V (ultra logic-level),2V (logic-level — IRF9Z34N),4V (standard — IRF9540N)
- Default:
- Max Drain Current (
Id_max): Sets the maximum safe continuous drain current.- Default:
30A - Range:
0.5A to100A (step size0.5A)
- Default:
- Max Gate-Source Voltage (
Vgs_max): Sets the maximum safe gate-source voltage magnitude before the gate oxide punctures.- Default:
20V - Range:
8V to30V (step size1V)
- Default:
4. Programming Notes
MOSFETs have no associated Blockly blocks. A P-Channel MOSFET is commonly chosen specifically so a microcontroller can switch a high-side (positive rail) load directly, without needing a level-shifted gate driver an N-Channel high-side switch would require.
5. Simulator Behavior
- Real-time Drain Current Readout & ON/OFF Label: Same live-overlay pattern as the N-Channel
MOSFET —
Id=…mA,ON/OFFlabel, glow while conducting, orange warning near either rating. - Two Real Fault Conditions: same as the N-Channel MOSFET —
OVERCURRENT(drain current exceedsId_max) andBREAKDOWN(gate-source voltage magnitude exceedsVgs_max, permanent gate-oxide puncture).

