Breadboard

A breadboard is a solderless prototyping platform — a grid of spring-loaded holes internally bonded into row/rail strips, letting you build and rewire circuits without soldering.

Breadboard

At a glance

Pins and properties exactly as the circuit editor and simulator define this part. The text below explains how to use them.

Pins

Pins of this part
PinLabelType

Properties

What you can change in the Property Inspector.

Properties of this part
PropertyRange or choicesDefault
Rows30 (Half-size, 400 pts), 63 (Full-size, 830 pts)30 (Half-size, 400 pts)
Show ConnectionsOn or offoff

A breadboard is a solderless prototyping platform — a grid of spring-loaded holes internally bonded into row/rail strips, letting you build and rewire circuits without soldering. In Open Maker Studio, it does not have Blockly code blocks and, unlike every other component in this chapter, it has no electrical pins of its own at all — components placed on it are auto-connected through OMS's spatial hole-click system instead.


1. Real Structure

OMS's breadboard is a real 400-point, half-size layout, confirmed directly in breadboard.ts:

breadboard-Points.0cb504b6a6

  • 10 columns, lettered a–j, with a center gap after column e (the standard gap real breadboards use to straddle a DIP IC without shorting its two pin rows together).
  • 30 rows of main strips — each row's 5 left holes (a–e) and 5 right holes (f–j) are each their own internally-bonded strip (left and right sides are NOT bonded to each other, matching a real breadboard's center-gap behavior).
  • 4 power rails — two on the left (+/−), two on the right (+/−) — each an entire single node running the full length of the board.
  • The component's canvas artwork is displayed rotated 90° by default (defaultAngle: 90).

2. Component Properties (Property Inspector)

When you select the Breadboard on the canvas, you can modify the following parameter in the Property Inspector panel:

  • Show Connections (showConnections): Overlays colored highlight bands on top of the hole grid, visually showing exactly which holes are internally bonded together — each of the 30 row strips gets its own color, and all 4 power rails are highlighted too (red for +, blue for −). Genuinely useful for understanding why two components you didn't expect to be connected are electrically joined.
    • Default: false

3. Programming Notes

The breadboard has no associated Blockly blocks and, unlike every other component covered in this chapter, it also has no pins array at all (pins: []) — its connectivity is handled entirely through a separate spatial hole-click system, not the standard pin-socket mechanism every other component uses.


4. Simulator Behavior

  • Auto-Connection: placing a component's leads into breadboard holes on the same row strip (or the same power rail) automatically electrically joins them — no manual wiring needed for same-strip connections.
  • No SPICE Elements of Its Own: the breadboard's spice.build() returns empty ({ lines: [], modelLines: [], senseMap: {} }) — it contributes zero components to the circuit itself; all its effect on the simulation comes from how it merges node names for whatever's plugged into it.
Breadboard — OMS Parts